Home
Classes
About PMC
Jewelry
Links
About The Artist

Directions & Information
Shopping

Evenheat PMC Kilns

These kilns are fully programmable, designed for PMC firing and are also excellent choices for enameling and glass fusing. Formerly known as the Sierra series, these are made by the Evenheat. Evenheat has been producing quality kilns for over 50 years. MED'A Creations offers these kilns at a discount from the suggested retail price.  
Order online, call 510-236-2313, or email  mary@medacreations.

Comes in 4 sizes
   Model    Chamber
         E91          4.5"x4.5"x4.5"h
         E360       8"x8"x6"h
         E450       8"x8"x8"h
         E1100    12"x12"x8"h
Run on standard household current
Inexpensive to run:  The E360 costs less than 30 to fire for 1 hour assuming the moste expensive California power rates ($0.19735/Kwh).  At the average US power cost of 11/Kwh this is about 16 per hour or about 10.5 per firing
Maximum firing temperature is 2000 F, precisely regulated by the built in  digital programmable controller.
Fully programmable with 5 pre-programmed settings for firing PMC
      Prog. 1: PMC+ Fast
      Prog. 2: PMC3 Fast
      Prog. 3: PMC3 Slow
      Prog. 4: PMC Standard
      Prog 5: PMC Gold
      Prog. --: Fully programmable mode with
                    8 ramp up/down and hold settings
Clear Ceramic window in door for viewing work.  Good to 2000 F
Durable baked on powder coat finish
Improved control buttons--easy to press and won't wear out
Angled control panel for easy visibility with rocker power switch on front of kiln
Easy access front and rear panels for maintenance
Ceramic fiber firing chamber with embeded elements in walls 
No heating elements in floor (safer for glass fusing, cermaic glazing, and enamels
Kiln doors open full 180 on durable hinges that won't allow door to sag
Vent hole in top of kiln to promote clean burn-out
Inlcues firing shelf and post
Built by Evenheat, a one of the leading kiln manufacturers in the USA
Full one year warranty

Model E91

My personal favorite for taking to classes and fitting into small studio spaces, the E91 is the smallest, fastest, and lightest of the PMC kilns.  It is excellent if you have storage space issues or travel to classes.  The firing cycle for quick firing PMC+  (1650 for 10 minutes) takes approx. 20-25 minutes to complete when starting from room temperature.
4.5” cube firing chamber
Exterior dimensions 10”x10”x14”h
6 amps at120 volts
Ship weight 20 lbs

Model E360

This is the most popular model, for price and size.  It is still small enough to transport to classes.  The firing cycle for quick firing PMC+  (1650 for 10 minutes) takes approx. 40-45 minutes to complete when starting from room temperature.
8” x 8” x 6” high firing chamber
Exterior dimensions 12”x12”x16”h
Ship weight 36 lbs
12 amps at 120 volts

Model E450

Great if you want to fire taller objects or do multi-shelf firing.
8” cube firing chamber
Exterior dimensions 12”x12”x18”h
Ship weight 40 lbs
15 amps at 120 volts

Model E1100

The largest of the PMC kilns, this model allows you to do larger mixed media PMC, glass, and ceramic projects.  The large chamber permits the use of lampwork glass bead mandrels for annealing.
12” x 12” x 8” high firing chamber
Exterior dimensions 19”w x 18”d x 19”h
Ship weight 84 lbs
15 amps at 120 volts

 

MED’A Creations
San Pablo, California
Phone / fax:  510-236-2313  
www.medacreations.com   mary@medacreations.com